how to partition a hard drive comprehensive guide

Looking for how to partition a hard drive, you are at right place.Follow our these simples steps to format a hard disk drive and start storing your precious data after partitioning the harddrive.Partition means exploring the drive to enable it to store data in it.

How to partition a hard drive

The very first thing to do after installing a hard drive is to partition it. You have to partition a hard disk drive, and then formatit, before you can use it to store data.

To partition a hard drive in Windows way to section off a portion of it and then make that part readily available to the working system. Most of the time, the “component” of the hard drive is that the entire usable space, but making many partitions on a tough drive is also feasible.

How to partition a hard drive

Don’t worry if that sounds like more than you ever believed – partitioning a hard drive in Windows isn’t difficult and generally only takes a few minutes to do.

Follow the easy steps below to partition a hard disk drive in Windows 10, Windows 8, Windows 7, Windows Vista, or Windows XP:

Notice: Manually partitioning (as well as formatting) that a hard drive is not necessary if your end objective is to install Windows onto the drive. Both of those processes are contained as part of the setup procedure, which means that you do not need to prepare the drive yourself. Notice How to Clean Install Windows for additional help.

Open Disk Management, the tool included in most versions of Windows that enables you to partition drives, among a number of other things. .

Note: In Windows 10 and Windows 8/8.1, the Power User Menu is the simplest way to start Disk Management. You may also begin Disk Management via command-line in any version of Windows but the Computer Management method is probably best for many people.

See What Version of Windows Do I Have? If you are not sure which version of Windows you have.

When Disk Management opens, you must observe an Initialize Disk window with the message “You must initialize a disc prior to Logical Disk Manager may access it”

Hint: Do not worry if this window does not appear. There are valid reasons why you may not see it – we’ll know shortly if there is a issue or not. Jump to Step 4 in case you don’t find this.

Note: In Windows XP, you are going to see that an Initialize an Convert Disk Wizard screen instead. Adhere to this wizard, which makes sure to not choose the option to “convert” the disk, unless you are positive that you want to. Jump to Step 4 when done.

With this display, you’re requested to select a partition style for the new hard disk.

Choose GPT when the new hard drive you set up is 2 TB or larger. Choose MBR if it is smaller than 2 TB. Tap or click OK after making your selection.
Find the hard drive you need to partition in the drive map at the bottom of the Disk Management window.

Tip: You may have to maximize the Disk Management or Computer Management window to view all of the drives on the bottom. An unpartitioned drive will not appear in the driveway list near the top of the window.

Notice: in the event the hard disk is new, it will most likely be on a dedicated row labeled Disk 1 (or 2, etc.) and also will say Unallocated. If the space that you would like to partition is part of an current drive, you will see Unallocated next to existing partitions on this drive.

Important: should youn’t find the drive that you want to partition, you might have installed it incorrectly. Turn your computer off and double-check that the hard disk is properly installed.
When you’ve discovered the space that you wish to partition, then tap-and-hold or right-click anywhere on it and select New Straightforward Volume….

In Windows XP, the alternative is named New Partition….
Harness or click Next > on the New Simple Volume Wizard window that looked.

In Windows XP, a Select Partition Type display appears next, in which you must choose Primary partition. The Railroad partition option is helpful only if you are producing five or more partitions on one physical hard disk. Click Next > after making the selection.

Harness or click Next > on the Specify Volume Size step to confirm the size of the drive you’re creating.

Note: The default size that you see in the Straightforward size size at MB: field must equal the amount shown from the Maximum disk space in MB: field. It follows that you’re creating a partition that equals the entire available area on the actual hard disk.

Tip: You are welcome to create several partitions, that will eventually become multiple, independent drives from Windows. To do so, compute just how many and how large you need those drives to copy and be these steps to create these partitions. You’re welcome to set the Assign the following drive letter option to anything that is available.

Hint: You are also welcome to alter the letter assigned for the hard drive later on in case you want. Notice How to Change Drive Letters in Windows for help doing that.

Choose Don’t format this volume about the Format Partition measure and then tap browse Next >

Notice: In case you understand what you’re doing, feel free to format the drive as part of the process. However, since this tutorial concentrates on partitioning a hard drive in Windows, I’ve left the formatting into some other tutorial, linked in the previous step below.
Check your choices on the Finishing the New Straightforward Volume Wizard display, which should look something like that:
Volume Kind: Simple Volume
Disk picked: Disk 1
Volume dimension: 10206 MB
Drive letter or route: D:
File process: None
Allocation unit size: Default
Notice: Because your computer and hard drive are improbable exactly like mine, expect your Disk picked, Volume size, and Drive hint or route values are different that what you see here. File system: Not just suggests that you have decided not to also format the drive right now.
Harness or click the Finish button and Windows will partition the drive, a procedure that is only going to take a couple of seconds on most computers.

Note: You will notice that your cursor is busy in this period. Once you see the new drive letter (D: in my case) appear in the listing at the top of Disk Management, then you know the partitioning procedure is complete.
Next, Windows tries to open the new drive. However, as it is not yet hardened and can’t be utilized, you are going to see a “You want to format the disc in drive D: before you may use it. Would you like to format it again?” Instead.

Notice: This just occurs in Windows 10, Windows 8, and Windows 7. You won’t find this in Windows Vista or Windows XP and that is absolutely fine. Just jump to Step 14 when you are using one of those versions of Windows.
Harness or click Cancel and move to Step 14 below.

Tip: If you are knowledgeable about the concepts involved in formatting a hard drive, then feel free to choose Format disc instead. It is possible to use my tutorial linked in the next step as an overall guide if you want to.
Proceed to the Way To Format a Hard Drive in Windows tutorial for instructions on formatting that partitioned drive so you can use it.

Advanced Partitioning

Windows doesn’t allow for anything but very basic partition management after you produce one, but a number of software programs exist that can be helpful if you need them.

Visit my Free Disk Partition Management Software for Windows list for updated reviews on such tools and more information on what you can do together.

Hope this guide of  How to partition a hard drive will be helpful for you to partition your hdd and use it for your storage, data, movies, videos, music and other photograph files.